User`s manual

43
SCHEDULED MAINTENANCE (up to 60 months)
NOTE
Staff members employed in the maintenance of the machine must:
• Be properly trained
• Be familiar with this user’s manual
• Have an in-depth knowledge of accident prevention rules and regulations
• All non-authorized personnel must keep outside the working area during operations
Before starting the machine after a breakdown event, the machine must be carefully inspected and checked in
order to detect any damages; start up operations must be performed anew.
Never interfere, unless specifically required for repairs, with the settings or the arrangement of the safety devices.
Tampering with them may result in serious damages to the machine.
When it is not needed, cut off power supply to the machine while performing maintenance operations on it.
Put up a notice saying: MACHINE UNDER MAINTENANCE – DO NOT CONNECT TO POWER SUPPLY.
Never cut off safety and protection devices fitted on the machine: should it be necessary to do so, display warning signs
inviting to operate with the greatest caution.
Always verify the existence and suitability of grounding connections as well as their compliance with rules and
regulations. Failure to ground electric equipment may result in serious injury to persons.
Avoid using flammable or toxic solvents (benzine, ether, alcohol, etc.) Avoid prolonged contact with solvents and inhaling
their vapors. In particular, avoid using them in the proximity of open flames.
Always make sure, before starting the machine, that maintenance men are at safety distance and that tools and
materials were not left on or by the machine.
Always use protective gloves while performing maintenance operations.
All accessible moving parts and transmission members, excluding the wire rope and block only, must be protected
against accidental contacts. Fit protections back into place before putting the machine back into operation.
In the event of a fire, never use water; disconnect all power supply and use suitable fire extinguishers.
Ensure the tools to be employed are in perfect conditions and have insulating handgrips, if required.
Pay the utmost attention to all RESIDUAL RISKS highlighted on board of the machine and in this user’s manual.
QUALIFICATION OF SERVICEMEN
In order to be in a position to properly perform maintenance operations on the machines and their accessories, maintenance
men must:
• know the laws in force with regard to accident prevention for maintenance operations on machines with motor transmission
and be capable of applying them;
• be able to use and refer to this documentation
• be involved in the functioning of the machine
• detect any irregularity and, if need be, take the necessary measures.