User`s manual

39
REPLACING THE CHAIN
If the chain vibrates or squeaks checking its efficiency is mandatory.
Should there be any doubts with regard to cracks, bucklings, wear, replace the chain and, preferably, the sprocket too.
• Remove the chain container and unhook the stop on the end of the chain.
• Connect the first link of the new chain to the last link of the old chain by means of a small flexible cable, then run the old
chain downwards.
• Please bear in mind that the side of the chain where the welding point is must be external with respect to the sprocket.
• Put the end stop and the chain container back into place.