User`s manual

10
RULES AND REGULATIONS
The following chief technical rules and regulations were taken into account while designing and building our lifting machinery:
• EN-292, Section 1a and 2a “Safety of Machinery”
• EN-60204 –1 ”Safety of Machinery. Electrical Equipment of Machines”
• EN-60204 -32” Safety of Machinery. Electrical Equipment of Machines. Requirements for Hoisting Machines”
• EN-60439 -1 “Low-Voltage Switchgear and Control gear Assemblies”
• EN-60529 “Specification for Degrees of Protection Provided by Enclosures (IP code)”
• ISO 4301 “Classification of Cranes and Lifting Appliances”
• ISO 4308-1 “Selection of wire ropes”
• UNI 7670 “Calculation of Mechanisms for Lifting Equipment ”
• UNI 9466 “Calculation of the drums”
• DIN 15401 ”Selection of lifting hooks”
• FEM 1.001/94 “Calculation of Lifting Equipment”
• FEM 9.511/86 “Classification of Mechanisms”
• FEM 9.661/86 “Selection of wire rope drums and pulleys”
• FEM 9.761/93 “Load Limiting Device”
• FEM 9683/95 “Choice of hoisting and traveling motors”
• FEM 9.755/9 “Safe Working Periods”
• FEM 9.941/95 “Control Symbols”
• FEM. 1.001 3rd edition 1987: volume;
• CNR-UNI 10021/85: “Steel Structures for Lifting Equipment”;
• UNI EN1993-6:2007: Eurocode 3 – Design of Steel Structures - Part 6: Crane Supporting Structures