User manual

9
4. Connect the Power Cable
 Connect the cable from the power adaptor to the power inlet socket on the back panel,
as shown
 Plug the power adaptor in to a wall outlet or socket strip.
 Turn on YOYORouter using the on-off switch next to the power connector
2.3.Connecting to YOYORouter BE5
Using Ethernet cable (easiest):
 Plug in the Ethernet cable to a LAN port and check that the corresponding LAN indicator
lights up.
YOYORouter’s Wi-Fi network has a network name (SSID) like YOYORouter-07-76. The network
name and password are printed on the label on the underside of the device and on the label
affixed to the carton in which it was packaged.
To connect using Wi-Fi (Microsoft Windows 7):
 Click the icon in the notification area
 Select YOYORouter’s network.
 Click Connect and enter the Wi-Fi password when prompted.
To connect using Wi-Fi (Mac):
 Click the network icon
 Select the YOYORouter’s network.
 When prompted, enter the Wi-Fi password.
Note: since connections to YOYORouter are made using Wi-Fi and Ethernet, a wide range of
devices including Linux based and mobile can connect without needing any special software or