User manual

* indicates mandatory items. In most cases only APN is needed; DNS is rarely required.

Note: the number to dial is *99#

I have set up my PIN code but YOYORouter still cannot connect

If your SIM has a PIN code, the configuration wizard may not have been able to detect the

settings for the mobile operator.

 Restart YOYORouter and re-run the wizard

 Configure YOYORouter manually

My Mobile Internet connection drops unexpectedly

 Position your YOYORouter so that the signal strength is as strong as possible

 Check that the Connection Control setting at Advanced > Basic > Network Setup >

Connection Control is set to Auto Reconnect (always-on)

My Mobile Broadband connection is very slow (2G service)

If the connection is using a 2G network, indicated by then the very fastest you can

expect is around 200kbps download (EDGE) or 54kbps (GPRS).

 Try moving YOYORouter to a window or different location to pick up a 3G signal. (3G

network operate at higher frequencies which penetrate buildings less well than 2G)

By default, YOYORouter always selects a 3G network when available (auto mode). It is

possible to select 2G only or 3G only service.

 Check that YOYORouter is not in Preferred Service Mode 2G Only or 2G First;

preferred mode is Auto Mode.

Some network operators only provide 3G service for Mobile Broadband devices.

 You must relocate YOYORouter to a position where 3G service is available