User manual

75
 If you changed the IP address and no longer know the new setting, you should
perform a factory re-set and then reconfigure your YOYORouter.
5.3.Problems with the Mobile Broadband Connection
YOYORouter isn’t connecting to Mobile Broadband
When YOYORouter cannot connect, the indicator is shown. When it flashes,
YOYORouter is trying to connect; allow up to 60 seconds to see if the connection attempt is
successful. YOYORouter selects a default connection profile, based on the SIM that is
inserted.
You can find more information on the status page at 192.168.1.1
Basics:
 Make sure that the SIM is correctly inserted
 If the SIM needs a PIN code, use the configuration wizard to enter the PIN to
YOYORouter.
 Check that there is mobile service at your location
The default connection profile suits most users, however you may need to select an
alternative:
1. Access the configuration wizard by selecting 192.168.1.1 in your browser
2. At the 3G step, select Manual for Dial-Up Profile
3. Select your country
4. Select your mobile operator. If there are several listings, select the one that most
closely corresponds with your subscription (for example, PrePay). If you have special
settings or your operator is not shown, select Others and enter the details manually.
5. Complete the wizard
6. Allow YOYORouter to restart
7. Check if a connection can now be made.
Note: If you need to ask your mobile operator for settings, you will need the following:
 APN (Access Point Name)*
 Username
 Password
 Primary DNS
 Secondary DNS