User manual

72
pre-selected short code.
4.2.2. To receive a call
1. The incoming call rings on the connected telephone.
2. If the connected telephone supports a CLI display that is compatible with BE5 and the
calling number is available, it is displayed on the connected telephone.
3. Lift the receiver or press the answer button, according to the operation of the
connected telephone.
4. When the call is over, replace the receiver or press the call end button, according to
the operation of the connected telephone.
4.2.3. Admin Features
Settings for Telephony include Call Forwarding, Call Log etc are documented in the Reference >
Voice section.
The Voice Admin features can be accessed by the administrator. They can also be accessed
by typing password YOYOguest as the admin password. In this case only status, telephony
and SMS features are presented.