User manual

48
3.2.3.4.MAC Control
MAC Address Control allows you to assign different access right for different users and to assign a
specific IP address to a certain MAC address.
1. MACAddress Control
Check “Enable” to enable the “MAC Address Control”. All of the settings in this page will
take effect only when “Enable” is checked.
2. Connection control
Check "Connection control" to enable the controlling of which wired and wireless clients can
connect with this device. If a client is denied to connect with this device, it means the
client can't access to the Internet either. Choose "allow" or "deny" to allow or deny the
clients, whose MAC addresses are not in the "Control table" (please see below), to connect
with this device.
3. Association control Check "Association control" to enable the controlling of which
wireless client can associate