User manual

26
3. Server IP Address/Name: the IP address or URL of the PPTP server.
4. PPTP Account and Password: the account and password your ISP assigned to you. If
you don't want to change the password, keep it empty.
5. Connection ID: optional. Input the connection ID if your ISP requires it.
6. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to
zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is enabled,
this product will connect with ISP automatically, after system is restarted or connection
is dropped.
7. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device connects when power is switched
on and remains connected.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
8. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default
MTU value is 0(auto).