User manual

22
A. WAN Type: Dynamic IP Address
1. Combo WAN Status: Used to define the failover Internet source (e.g. 3G)
2. Host Name: optional, required by some ISPs, for example, @Home.
3. ISP register MAC address: You can change the WAN port MAC address, it is your ISP
assigned to you.
4. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on) : The device connects when power is switched
on and remains connected.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
5. NAT disable: the option bridges data form WAN port to LAN port.