User manual

3.2.Advanced Settings

3.2.1. Basic Setting Group

3.2.1.1. Network Setup

1. LAN IP Address:

the local IP address of this device. The computers on your

network

must use the LAN IP address of your product as their Default Gateway. You can

change it if necessary.

2. Subnet Mask: insert 255.255.255.0

3. Combo WAN Status:

Used to define the failover Internet source (e.g. 3G)

4. WAN Interface:

Select Ethernet WAN or Wireless WAN to continue.

5. WAN Type

: WAN connection type of your ISP. You can click WAN Type Combo

button to choose a correct one from the following options: