User manual

13
2.7.Setting up YOYORouter BE5 in Ethernet WAN mode
with 3G Failover
Configure YOYORouter BE5 in Ethernet WAN mode and test the connection.
To add failover to 3G Wireless WAN, ensure that your SIM Card is inserted and the Ethernet
WAN is
connected then follow these steps:
1. Log in.
2. Select Advanced then Network Setup.
3. Make sure that Connection Control is set to Auto Reconnect (always-on).
4. Against Combo WAN Status, click the Setting button.
5. Set Combo WAN Mode to Failover.
6. Enter an IP address in Remote Host for Keep Alive that YOYORouter can ping to
check the connectivity. This can be numeric, e.g. 8.8.8.8 or text, e.g. www.google.com.
7. Your Ethernet WAN connection is shown as primary WAN. To add the 3G WAN as
failover, click the Add button against Secondary WAN and select 3G in the drop-down
box.
8. Click the Save button.
9. The Dial-Up Profile (connection settings) for 3G mobile broadband are now displayed.