User guide

Setting up YOYORouter BE5 in Ethernet WAN mode
1. Plug in the Ethernet cable (for example from an ADSL modem) to the WAN port and switch on
Y
OYORouter.
2
. Connect to YOYORouter, access the status page at http://192.168.1.1 and log in.
3. Select Wizard and step through the Setup wizard.
4. At the step Select WAN Type
• Choose Setup WAN Type Manually.
• Select WAN Interface type Ethernet WAN.
• Select the required WAN Type.
• Enter the further information requested, as applicable. See Configuration Reference section in the User
Guide for more information.
5. At the end of the Wizard, click Apply Settings. YOYORouter restarts.
6. If you are connecting using Wi-Fi, you may need to re-make the connection in line with your new
settings.