User guide

Setting up YOYORouter BE5 in Wireless WAN Mode

. Plug in your SIM card and switch on YOYORouter. Allow at least 60 seconds for network scanning.

In most cases BE5 self-configures in Wireless WAN mode using default settings. You may need to

ustomize the settings, for example in the following cases:

• Your SIM requires a PIN Code.

• Your mobile broadband subscription requires different settings to those that YOYORouter selected

by default.

• You have special mobile broadband settings, for example a private APN (Access Point Name).

• You wish to change Wi-Fi settings.

To customize settings:

2. Connect to YOYORouter, access the status page at http://192.168.1.1 and log in.

3. Select Wizard and step through the Setup wizard.

• At Select WAN Type choose Setup WAN Type Manually

• Select WAN Interface option Wireless WAN

• Select WAN Type 3G

4. 3G Mobile Network Settings

• Connection settings are normally selected automatically from your SIM.

• Select Dial-Up Profile option Manual at the 3G step if you need to select alternative or enter special

settings. Select your country and the network operator, or Others to enter your own settings.

• If your SIM requires a PIN code, enter it now.

5. At the end of the Wizard, click Apply Settings. YOYORouter restarts.

6. If you are connecting using Wi-Fi, you may need to re-make the connection in line with your new set-

tings.