User's Manual

Page 14Page 13

Adjusting the Car Siren Volume:

In order to decrease the chirping volume of the siren, cut the loop located on

the siren.

Adjusting the Shock Sensor Sensitivity:

In order to the shock sensor sensitivity, turn the screw located on the

sensor clockwise. In order to decrease the sensitivity, turn the screw located

on the sensor counter-clockwise. Turning the screw just a small amount can

make a big difference so make sure you recheck the sensitivity after each adjust-

ment.

Setting

AUX No.

2-9

Access to passive mode through a remote

Non setting of passive mode

Setting of passive mode

Button

III

All outputs are connecting with

Channel Expander through AUX1.

Button

III

AUX 1,

AUX 2

Button

III

Button

II-

Button

III-

Button

IV-

off

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUX 7

Output