User's Manual

Page 10
Programming
Programming Menu 1
Programming Menu 2
Option Selection
Factory Setting
Option Selection
Default Setting Selection
6 Button Remote
(Trunk+Start)-
(Trunk+Stop)-
(Stop)-
Lock
Unlock
(Start)-
4 Button Remote
(I+II)-
(I+IV)-
(IV)
( I )
( II )
( III )
Option Programming for Six Button (ONE WAY) Remotes .
The procedures will be same as the 4 button remotes except the use of the
different buttons.
Feature
Door Lock / Unlock Pulse Duration
Driver’s Priority Unlock
Double Pulse Unlock
Dome Light Factory Rearm
0.8 sec
OFF
OFF
OFF
2.5 sec
ON
ON
ON
Factory Default
Setting - Button I
Optional
Setting - Button II
Remote-Pager Programming Menu Options
Programming Menu #1 ( Door Lock Options )
1- 1
1- 2
1- 3
1- 4
1- 5
1- 6
1- 7
Note
1- 4 This feature unlocks the driverᴗs side door lock with the first unlock pulse.
A second unlock pulse is need to unlock the rest of the car doors.
Page 9
ᵉ
If you hear a long chirp, you are going out of programming mode,
please go back to Step 1.
ᵉ
If you want to change more options, go back to Step 1.
Option Programming for Four Button Remotes
Step1: For programming menu 1 : Press Buttons (
I+II
) for 2 seconds.
For programming menu 2 : Press Buttons (
I+IV
) for 2 seconds.
The car will chirp once indicating that you are in programming mode.
Step2: Within a 2 seconds after pressing (
I+II
) or (
I+IV
), press Button IV the
number of times to go to the option number you want to change.
You will hear a chirp and see the parking lights flash each
time when you press Button
IV
.
Step3: Wait a few seconds. You will hear a number of chirps and see a
number of parking light flashes corresponding to the option num
ber you want to change. If the number of chirps or flashes is not
what you want, go back to Step 1.
Step4: Press Button I for the default factory settings and your car will
respond by one chirp and one flash. Press Button
II for the
optional setting and your car will respond by two chirps and two
parking light flashes.
Resetting the Programming Options to the factory default settings.
Step1 : Press Buttons (
I+II
) simultaneously or Buttons (
I+III
) simultaneously
for 2 seconds. Step 1 is confirmed by a car chirp and a one-time
flashing of the parking light.
Step2 : Press Button III three times. This is confirmed by a car chirp and
parking light flash each time you press Button III . A few second later,
your car will chirp and parking light flash three times rapidly.
Your car is now set to all of the original factory default settings.