User's Manual

Each time when you program a Remote, you have
to program the 2nd or 3rd Remote also even if it
was programmed previously. The parking lights will flash twice after 6 seconds.
PROGRAMMING OPTIONS WITH REMOTE
Step 1:
Place the KEY in the Ignition and turn to ON position.
Step 2:
Press Button I+IV at the same time for 1/2 second.
Lights will flash and the siren will chirp once to confirm
you are in the Programming Options.
Step 3:
Press Button I
for 1/2 sec. for Ignition Controlled Lock ON
Press Button IV
for 1/2 sec. for Ignition Controlled Lock OFF
(Lights will flash and the siren will chirp twice to confirm Step 3)
Step 4:
Press Button I for 1/2 sec. for Passive Arming
(automatic arming in 30 seconds)
Press Button II for 2 sec. for Semi-Passive Arming(if a door is
opened within the 30 sec., the vehicle will not be armed passively.)
Press Button VI 1/2 sec. for Active Arming
(Lights will flash and the siren will chirp five times to confirm Step 4)
Note: Complete the above 4 steps within 6 seconds ;
otherwise, you will hear 3 chirps If the siren chirps 3 times, you have to repeat the 4 steps.
LIMITED LIFETIME WARRANTY
Firstech, Inc. Warrants to the original purchaser that this
product shall be free of defects in material and
workmanship under normal use and circumstances for the
period of time that the original owner of this product
owns the vehicle in which it is installed; except that the
remote controller unit for the period of one year from the
date of installation to the original owner of this product.
When the original purchaser returns the product to the
retail store where it was purchased or pre-paid postal to
Firstech, Inc., 230 E. Potter Suite 8, Anchorage, Alaska
99518, USA within the warranty period, and if the