User's Manual

Page 3 of 8 - 3
-
1. Transmitter Button Functions
Channel
Button Press
for
Function Factory
Setting
1. I 1/2 sec Arm/Disarm; VPS on/off
2. II 1/2 sec Aux 1
3. III 1/2 sec Aux 2
4. IV 1/2 sec Query
5. I - 2 sec Panic
6. II - 2 sec Remote Starting - On/Off
7. III- 2 sec Trunk
8. IV- 2 sec CompuGlo Back Light On/Off On
9. (I+II) 1/2 sec Siren Chip - On/Off On
10. (I+III) 1/2 sec Valet Mode - On/Off Off
11. (I+IV) 1/2 sec Shock Sensor On/Off On
12. (II+III) 1/2 sec Transmitter Beep - On/Off On
13. (II+IV) 1/2 sec Timer Mode 1.5 hour - On/Off Off
14. (III+IV) 1/2 sec 2
nd
Car Off
15. (I+II)- 2 sec Option Programming 1
16. (I+III)- 2 sec Option Programming 2
2. Alarm Function
Upon arming, your alarm will be triggered by:
•
Light Impact (first stage shock sensor). The siren will chirp 4 times and the parking
lights will flash for a few seconds. The transmitter will be paged and the vibration
icon will appear in the LCD.
•
Heavy impacts (second stage shock sensor). The siren will go off and the parking
lights flash for 60 Seconds. The transmitter will be paged and the Hammer in the
LCD will appear.
•
Door opened. The siren will go off and the parking lights will flash for 60 Seconds.
The transmitter will be paged and the door icon will appear in the LCD.
•
If you have installed the Optional starter kill function, your vehicle will not start with
key when system is armed.
Note:
(Siren duration 30Sec. or 60Sec. refer to programming section)
3. Panic
In Case of an emergence and you want to track attention. Press Button I for 2 Seconds
and you will enter Panic Mode. The siren will go off and the parking light will start
flashing. To disengage Panic Mode. Press Button I for ½ Second.