Installation guide

Software Operation Manual
82
4.8.5 Alert By Mail Configuration
To configure the RAID subsystem’s e-mail function, move the cursor bar to the main
menu and click on the “System Controls” link. The “System Controls” menu will show
all items. Move the cursor bar to the “Alert By Mail Configuration” item, then select the
desired function. This function can only be set via web-based configuration.
The firmware contains a SMTP manager monitoring all system events. Single or
multiple user notifications can be sent via “Plain English” e-mails with no software
required.
4.8.6 SNMP Configuration
To configure the RAID subsystem's SNMP function, move the cursor bar to the main
menu and click on the “System Controls” link. The “System Controls” menu will show
all items. Move the cursor bar to the” SNMP Configuration” item, then press Enter key
to select the desired function. This function can only set by the web-based
configuration.
The firmware contains SNMP Agent manager monitors all system events and user
can use the SNMP function from the web setting with no Agent software required.
Please refer to Appendix C SNMP operation & Definition for more detail information
about the SNMP trap and definition.