Installation guide

Chapter 4. Web Browser-Based Configuration

For greater 2TB expansion:

 If your system installed in the volume, don't expand the volume

capacity greater 2TB, currently OS can’t support boot up from a

greater 2TB capacity device.

 Expand over 2TB used LBA64 mode. Please make sure your OS

supports LBA64 before expand it.

4.6.4.2 Volume Set Migration

Migrating occurs when a volume set is migrating from one RAID level to another,

when a volume set strip size changes, or when a disk is added to a RAID set.

Migration state is displayed in the volume state area of the “RAID Set Hierarchy”

screen” screen.

Note

1. If the volume is RAID level 30, 50, or 60, you can not change the

volume to another RAID level. If the volume is RAID level 0, 1,

10(1E), 3, 5, or 6, you can not change the volume to RAID level 30,

50, or 60.

2. Power failure may damage the migration data. Please backup the

RAID data before you start the migration function.