Installation guide

Chapter 4. Web Browser-Based Configuration
57
4.6.1.1 Volume Name:
The default volume name will always appear as Volume Set. #. You can rename the
volume set name as long as it does not exceed the 15 characters limit.
4.6.1.2 Volume Raid Level:
Set the RAID level for the Volume Set. Highlight the desired RAID Level from the
available RAID levels option.
4.6.1.3 Capacity:
The maximum volume size is the default initial setting. Enter the appropriate volume
size to fit your application.
4.6.1.4 Greater Two TB Volume Support:
If volume capacity will exceed 2TB, controller will show the "Greater Two TB Volume
Support" sub-menu. Greater Two TB Volume Support option: "No", "64bit LBA" and
"4K Block".
No:
It keeps the volume size with max. 2TB limitation.
64bit LBA:
This option uses 16 bytes CDB instead of 10 bytes. The maximum volume capacity
up to 512TB. This option works on different OS which supports 16 bytes CDB.
Such as: Windows 2003 with SP1 or later,
Linux kernel 2.6.x or later