Installation guide

Chapter 3. LCD Panel Configuration
29
Choose one RAID set from the Select Raid Set screen. Press ENT to confirm it.
The volume set attributes screen appears:
The volume set attributes
screen shows the volume set default configuration
value that is currently being configured. The volume set attributes are:
Volume Name.
Raid Level,
Capacity (Not supported via LCD Panel.)
Stripe Size,
Cache Mode,
SCSI Channel/SCSI ID/SCSI LUN,
Tagged Queuing,
All value can be changing by the user. Press the UP/ DOWN to select
the
attributes. Press the ENT to
modify each attribute of the default value. Using
the UP/DOWN to select attribute value and press the ENT to
accept the default
value
After user completes modifying the attribute, press the ESC t
o enter the Select
Capacity for the volume set. Using the UP/DOWN
to set the volume set
capacity and press ENT to confirm it.
When you are finished defining the volume set, press ENT
to confirm the
Create function.
Press ENT to define “FGrnd Init (Foreground initialization)” or press ESC
to
define “BGrnd Init (Background initialization)“. The controller will begin to
initialize the volume set, you have just configured. If space remains in the RA
ID
set, the next volume set can be configured. Repeat steps 7 to 12
to configure
another volume set.
Step12
Step11
Step10
Step9
Step8