Installation guide

Software Operation Manual
152
7.3.2 Lock Volume
To make an encrypted - volume key invalidated, follow the procedure below:
Syntax:
vsf lock
Parameter:
<vol=xx>
Description:
Lock Volume function secures a volume’s data from unauthorized access or
modification in the event of drive theft, as well as more routine activities such as
the return of defective drives for servicing or the decommission or repurposing
of drives. When the Lock Volume is configured by the user (or I.T.), the
encrypted - Volume Key is used to encrypt the data inside the volume.
Example:
CLI > vsf lock vol=1 [Enter]
Make VolumeSet#1 key invalidation.
7.3.3 Download an Encrypted – Volume Key File
To download an encrypted - volume key file, follow the procedure below:
Syntax:
vsf dlkey
Parameter:
<path=xxx>
Description:
However, once the encrypted volume is powered on, the volume will ask for the
Encrypted - Volume key to unlock it. If the correct Encrypted - Volume key is not
given, the volume cannot be decrypted. Use this command to unlock the
volume.
Example:
“CLI > vsf dlkey path=c:\key”
Download a key file to make encrypted - volume validated.