Installation guide

Software Operation Manual
150
Syntax:
vsf genkey2
Parameter:
<path=xxx>
Description:
The New Encrypted - Volume Key value is generated in this command by a
random number process. It will generate key file(s) by volume set and the file
name is the same as the volume set name. The RAID controller does not retain
the key on the itself. If the New Encrypted - Volume Key is not available, then
the data is not recoverable from that volume. However, good security practice
encourages New Encrypted - Volume Key to be backed up.
Example:
1. Create two Volume set (AXS-8167-VOL#000 & AXS-8167-VOL#001)
2. Set Full Volume Encryption to 256bit key, AES Key (VOL#000)
& 256bit key, password (VOL#001)
3. “CLI > vsf genkey2” Generate a key file into MRAID\CLI folder.