Installation guide

Chapter 5. McBIOS Configuration
125
5.5.5 Raid System Function
To set the “Raid System Function”, move the cursor bar to the main menu and
select the “Raid System Function” item and then press Enter key. The “Raid
System Function” menu will show multiple items. Move the cursor bar to an item,
then press Enter key to select the desired function.
5.5.5.1 Mute the Alert Beeper
The “Mute the Alert Beeper” function item is used to control the RAID
subsystem Beeper. Select Yes and press the Enter key in the dialog box to turn
the beeper off temporarily. The beeper will still activate on the next event.
5.5.5.2 Alert Beeper Setting
The “Alert Beeper Setting” function item is used to “Disabled” or “Enabled” the
RAID subsystem alarm tone generator. Select “Disabled” and press the Enter
key in the dialog box to turn the beeper off.
5.5.5.3 Change Password
The manufacture default password is set to 0000. The password option allows
user to set or clear the password protection feature. Once the password has
been set, the user can monitor and configure the controller only by providing the
correct password. This feature is used to protect the internal RAID system from
unauthorized access. The controller will check the password only when entering
the main menu from the initial screen. The system will automatically go back to