Installation guide

Chapter 5. McBIOS Configuration
115
5.5.3.2 Create Raid 30/50/60
To create 30/50/60 volume set from RAID set group, move the cursor bar to the
main menu and click on the “Create Raid30/50/60” link. The “Select the Raid
Set to Create Volume on It” screen will show all RAID set number. Tick on the
RAID set numbers (same disk No per RAID set) that you want to create and
then click on it.
The created new volume set attribute option allows users to select the Volume
Name, Capacity, Raid Level, Strip Size, SCSI Channel/SCSI ID/SCSI LUN,
Cache Mode, and Tagged Command Queuing. The detailed description of
those parameters can refer to section 5.5.3.1. User can modify the default
values in this screen; the modification procedures are in section 5.5.3.4.