Installation guide

Software Operation Manual
112
5.5.3.1.5 SCSI Channel
The RAID controller function simulates a external SCSI RAID controller. The
host bus represents the SCSI channel. Choose the “SCSI Channel”. A “Select
SCSI Channel” dialog box appears; select the channel number and press the
Enter key to confirm it.
5.5.3.1.6 SCSI ID
Each SCSI device attached to the SCSI card, as well as the card itself, must be
assigned a unique SCSI ID number. A SCSI channel can connect up to 15 devices.
The SAS RAID controller is a large SCSI device. Assign an ID from a list of SCSI
IDs.