Installation guide

Chapter 5. McBIOS Configuration
109
6. Repeat steps 3 to 5 to create additional volume sets.
7. The initialization percentage of volume set will be displayed at the button line.
5.5.3.1.1 Volume Name
The default volume name will always appear as Volume Set. #. You can rename
the volume set name as long as it does not exceed the 15 characters limit.
5.5.3.1.2 Raid Level
Set the RAID level for the volume set. Highlight RAID Level and press the Enter
key. The available RAID levels for the current volume set are displayed. Select a
"Raid Level" and press the Enter key to confirm.