Installation guide

Software Operation Manual
100
5.5.2.1 Create Raid Set
The following is the RAID set features for the RAID subsystem.
1. Up to 32 disk drives can be included in a single RAID set.
2. Up to 128 RAID sets can be created per controller. RAID level 30 50 and 60
can support up to eight sub-volumes (RAID set).
To define a RAID set, follow the procedures below:
1). Select “Raid Set Function” from the main menu.
2). Select “Create Raid Set“ from the “Raid Set Function” dialog box.
3. A “Select Drive For Raid Set” window is displayed showing the SAS/SATA
drives connected to the current controller.
Press the UP and DOWN arrow keys to select specific physical drives. Press
the Enter key to associate the selected physical drive with the current RAID set.
Repeat this step; the user can add as many disk drives as are available to a
single RAID set.
When finished selecting SAS/SATA drives for RAID set, press Esc key. A
“Create Raid Set Confirmation” screen will appear, select the Yes option to
confirm it.
4. An “Edit The Raid Set Name” dialog box appears. Enter 1 to 15 alphanumeric
characters to define a unique identifier for the RAID set. The default RAID set
name will always appear as Raid Set #.
5. Repeat steps 3 to define another RAID sets.