Installation guide

Hardware Operation Manual
51
Operation
 Battery conditioning is automatic. There are no manual procedures for battery condition-
ing or preconditioning to be performed by the user.
 In order to make sure all the capacity is available for your battery cells, allow the
battery cell to be fully charged when installed for the first time. The first time charge of
a battery cell takes about 24 hours to be fully charged.
Removing the Battery Backup Module
The battery module will need to be removed for one of the following reason:
 Disconnect battery module if there is a long storage period before deployment
 The LI-ION battery will no longer accept a charge properly.