Installation guide

Hardware Operation Manual

Fasten two M5 screws through the chassis ears in the front side of the chassis.

The RAID subsystem should now be securely mounted into the rack.

Figure 4: Secure the subsystem in the server rack

Install the RAID subsystem into the Rack Cabinet

1. Lift the RAID subsystem (one person on each side of the RAID system) and approach the

rack with the button-back of the RAID subsystem facing the end of Slide rails.

2. Slide the RAID subsystem evenly all the way into the rack cabinet.

3. Using the rack mount screws, secure the top and bottom of the RAID subsystem to the rack

frame.

Caution

The RAID subsystem is heavy; two people are required to move the system in the

procedure.