Installation guide

32
Installing memory module
Before install a DDRII SDRAM ensures the system is power off and disconnected. Then:
1: Removing the controller module from
Raid system.
2: Open the cover of controller module.
3. Insert a memory module into the
memory socket.
4. Close the cover of controller module.
Y3-12S6 Series
Y3-16S6 Series
Y3-24S6 Series
Before starting any kind of hardware installation, please ensure that
all power switches have been turned off and all power cords
disconnected to prevent personal injury and damage to the hardware
Use screws provided with RAID system only. Longer or shorter screws
may cause electric shorting or un-proper installed.