Installation guide

Hardware Operation Manual
29
Removing the controller from Y3-16/Y3-24 series
Y3-24S6 Series
Y3-16S6 Series
Installing the controller into Y3-16S6/Y3-24S6 series
Reverse the procedures as above to install the controller into Y3-16S6/Y3-24S6
series
1:
1-1) Disconnect the host
cables
1-2) Turn anti-clockwise to
release the thumb
screw.
1-3) Use the eject kit to remove
controller board.
2:
Slide it back and lifting off