Installation guide

Software Operation Manual
90
4.8.9 Generate Test Event
Use this feature to generate events for testing purposes. Such as test mail or SNMP
trap settings.
4.8.10 Clear Events Buffer
Use this feature to clear the entire events buffer information.
4.8.11 Modify Password
To set or change the RAID subsystem’s password, select “System Controls” from the
menu and click on the “Modify Password” link. The “Modify System Password” screen
appears.
The manufacture default password is set to 0000.
The password option allows user to set or clear the RAID subsystem’s password
protection feature. Once the password has been set, the user can only monitor and
configure the RAID subsystem by providing the correct password. The password is
used to protect the RAID subsystem from unauthorized entry. The controller will
check the password only when entering the main menu from the initial screen. The
RAID subsystem will automatically go back to the initial screen when it does not
receive any command in 5 minutes. Do not use spaces when you enter the password,
if spaces are used, it will lock out the user.
To disable the password, leave the fields blank. Once the user confirms the operation
and clicks the “Submit” button, the existing password will be cleared. Then, no
password checking will occur when entering the main menu from the starting screen.