Installation guide

Chapter 4. Web Browser-Based Configuration
89
4.8.7.1 NTP Server Address
The most important factor in providing accurate, reliable time is the selection of NTP
servers to be used in the configuration file. Typical NTP configurations utilize multiple
redundant servers and diverse network paths in order to achieve high accuracy and
reliability. Our NTP configuration supports two existing public NTP synchronization
subnets.
4.8.7.2 Time Zone
Time Zone conveniently runs in the system tray and allows you to easily view the date
and time in various locations around the world. You can also quickly and easily add
your own personal locations to customize time zone the way you want.
4.8.7.3 Automatic Daylight Saving
Automatic Daylight Saving will normally attempt to automatically adjust the system
clock for daylight saving changes based on the computer time zone. This tweak
allows you to disable the automatic adjustment.
Note
NTP feature works through onboard Ethernet port. So you must
make sure that you have connected onboard Ethernet port.
4.8.8 View Events/ Mute Beeper
To view the RAID subsystem’s event information, click on the “View Event/Mute
Beeper” link. The RAID subsystem’s “System events Information” screen appears.
The mute beeper function automatically enable by clicking on “View Events/Mute
Beeper”.
Select this option to view the system events information: Timer, Device, Event type,
Elapse Time and Errors. The RAID subsystem does not have a built-in real time clock.
The time information is the relative time from the system time setting. The maximum
event no. is 256 per controller.