Installation guide

Software Operation Manual
88
name into its request; otherwise, the SNMP agent will deny access to the
system.
Most network devices use “public” as default of their community names. This
value is case-sensitive.
 SNMP Trap Notification Configurations:
Please refer to Appendix D of Event Notification Table
4.8.7 NTP Configuration
The Network Time Protocol (NTP) is used to synchronize the time of a computer
client or server to another server or reference time source, such as a radio or satellite
receiver or modem. It provides accuracies typically within a millisecond on LANs and
up to a few tens of milliseconds on WANs relative to Coordinated Universal Time
(UTC) via a Global Positioning Service (GPS) receiver, for example: