Installation guide

Chapter 4. Web Browser-Based Configuration
87
4.8.6 SNMP Configuration
To configure the RAID subsystem's SNMP function, move the cursor bar to the main
menu and click on the “System Controls” link. The “System Controls” menu will show
all items. Move the cursor bar to the” SNMP Configuration” item, then press Enter key
to select the desired function. This function can only set by the web-based
configuration.
The firmware contains SNMP Agent manager monitors all system events and user
can use the SNMP function from the web setting with no Agent software required.
Please refer to Appendix C SNMP operation & Definition for more detail information
about the SNMP trap and definition.
 SNMP Trap Configurations: Enter the SNMP Trap IP Address.
 SNMP System Configurations: About community, Community name acts as
a password to screen accesses to the SNMP agent of a particular network
device. Type in the community names of the SNMP agent. Before access is
granted to a request station, this station must incorporate a valid community