Installation guide

Software Operation Manual
80
4.7.3 Delete Pass-Through Disk
To delete a pass-through drive from the pass-through drive pool, move the mouse
cursor bar to the main menus and click the “Delete Pass Through” link. After you
complete the selection, mark the check box for “Confirm The Operation” and click the
“Submit” button to complete the delete action.
4.7.4 Identify Enclosure
To prevent removing the wrong subsystem, the selected JBOD expander enclosure
all disks fault LED indicator will light for physically locating the selected subsystem
when the “Identify Subsystem” is selected. This function will also light the subsystem
LED indicator, if it is existed.
4.7.5 Identify Selected Drive
To prevent removing the wrong drive, the selected disk fault LED indicator will light for
physically locating the selected disk when the “Identify Selected Device” is selected.