Installation guide

Chapter 4. Web Browser-Based Configuration
73
4.6.1.10 Volume to Be Created:
The controller can support up to 128 volume sets. This option is defined volume
number using the same volume set attribute here.
4.6.2 Create Raid30/50/60
To create 30/50/60 volume set from RAID set group, move the cursor bar to the main
menu and click on the “Create Raid30/50/60” link. The “Select the Raid Set to Create
Volume on It” screen will show all RAID set number. Tick on the RAID set. Numbers
(same disk No per RAID set) that you want to create and then click on the “Submit”
button. The new create volume set attribute allows user to select the Volume Name,
Raid Level, Capacity, Greater Two TB Volume Support, Initialization Mode, Strip Size,
Cache Mode, Tagged Command Queuing, SAS Port/LUN Base/LUN and Volumes To
Be Created. Please refer to above section for details description of each item.