Installation guide

Chapter 4. Web Browser-Based Configuration
63
4.5.4 Offline RAID Set
This function is for customer being able to unmount and remount a multi-disk volume.
All Hdds of the selected RAID set will be put into offline state, spun down and fault
LED in fast blinking mode. User can remove those Hdds and insert new Hdds on
those empty slots without needing power down the controller.
4.5.5 Rename RAID Set
To modify the RAID Set Name
4.5.6 Activate Incomplete Raid Set
If one of the disk drives is removed in power off state, the RAID set state will change
to “Incomplete State”. If the user wants to continue to operate the controller without
power-off the RAID subsystem, the user can use the “Activate Incomplete Raid Set”
option to active the RAID set. After the user completes this function, the Raid State
will change to “Degraded Mode” and start to work.
To activate the incomplete the RAID set, click on the “Activate Raid Set” link. A “Select
the RAID Set to Activate” screen is displayed showing all RAID sets existing on the
current controller. Click the RAID set number to activate in the select column. Click on
the “Submit” button on the screen to activate the RAID set that had a disk removed (or