Installation guide

Software Operation Manual

Press the Yes to start the expansion on the RAID set. The new additional capacity

can be utilized by one or more volume sets. The volume sets associated with this

RAID set appear for you to have chance to modify RAID level or stripe size. Follow

the instruction presented in the “Modify Volume Set” to modify the volume sets;

operation system specific utilities may be required to expand operating system

partitions.

Note

1. Once the “Expand Raid Set” process has started, user can not

stop it. The process must be completed.

2. If a disk drive fails during RAID set expansion and a hot spare is

available, an auto rebuild operation will occur after the RAID set

expansion completes.

3. RAID 30/50/60 does not support the "Expand Raid set".