Installation guide

Chapter 3. LCD Panel Configuration
55
3.7.7.4 Telnet Port Number
To manually configure the "Telnet Port Number" of the RAID subsystem, press
the UP/DOWN buttons to select “Ethernet Configuration" function and press
ENT. Using UP/DOWN buttons to select "Telnet Port Number", and then press
ENT. It will show the default address setting in the RAID subsystem. You can
then reassign the default "Telnet Port Number" of RAID subsystem.
3.7.7.5 SMTP Port Number
To manually configure the "SMTP Port Number" of the RAID subsystem, press
the UP/DOWN buttons to select “Ethernet Configuration" function and press
ENT. Using UP/DOWN buttons to select "SMTP Port Number", and then press
ENT. It will show the default address setting in the RAID subsystem. You can
then reassign the default "SMTP Port Number" of RAID subsystem.
3.7.7.5 Ethernet Address
Each Ethernet port has its unique Mac address, which is also factory assigned.
Usually, Ethernet Address is used to uniquely identify a port in the Ethernet
network.
3.7.8 Show System Events
To view the RAID subsystem events, press ENT to enter the main menu. Press
UP/DOWN buttons to select the “Show System Events” option, and then press
ENT. The system events will be displayed. Press UP/DOWN buttons to browse
all the system events.
3.7.9 Clear all Event Buffers
Use this feature to clear the entire events buffer information. To clear all event
buffers, press ENT to enter the main menu. Press UP/DOWN buttons to select
the “Clear all Event Buffers” option, and then press ENT. The confirmation
message will be displayed and press ENT to clear all event buffers or ESC to
abort the action.
3.7.10 Hardware Monitoring Information
To view the RAID subsystem monitor information, press ENT to enter the main
menu. Press UP/DOWN buttons to select the “Hardware Information” option,
and then press ENT. All hardware monitor information will be displayed. Press
UP/DOWN buttons to browse all the hardware information. The hardware
information provides the CPU temperature, Controller temperature, fan speed
(chassis fan), battery status and voltage of the RAID subsystem. All items are
also unchangeable. The warning messages will indicate through the LCD, LED
and alarm buzzer.