Installation guide

Software Operation Manual
50
F
END
View System Events
ENT : To Clear
ESC : To Abort
System Information
EtherNet
Configuration
DHCP Function
Local IP Address
HTTP Port Number
Telnet Port Number
SMTP Port Number
Select DHCP Setting
* Enable
<Enabled, Disabled> Wrap Around
Confirm Change ?
ENT : Yes ESC : No
Edit The Local IP Address
* 192.168.1.100
Keyin IP Address and Confirm Change
ENT : Yes ESC : No
Edit The HTTP Port Number
* 00080
Edit The Telnet Port Number
* 00023
Edit The SMTP Port Number
* 00025
Keyin Port number and Confirm
Change ENT : Yes ESC : No
Keyin Port number and Confirm
Change ENT : Yes ESC : No
Keyin Port number and Confirm
Change ENT : Yes ESC : No
Clear Event Buffer
Clear Event Buffer ?
* Yes
Hardware Monitor
E#1: SAS RAID System V1.0
Voltage#1 3.300
Voltage#2 5.000
Voltage#3 12.000
Fan#1 2280
Fan#2 2343
Fan#3 2393
Fan#4 2360
Power#1 OK
Power#2 OK
UPS Status OK
Temperature#1 32
Temperature#2 32
Temperature#3 32
Temperature#4 32
Temperature#5 32
Temperature#6 32
The System Information
Main Processor : 800MHz PC440
CPU ICache Size : 32KB
CPU DCache Size : 32KB/Write Back
CPU SCache Size : 512KB/Write Back
System Memory : 1024MB/533MHzECC
Firmware Version : V1.48 2010-09-07
BOOT ROM Version : V1.48 2010-09-01
MPT Firmware Ver : 1.20.0.0
Serial Number : 1100-2116-6633
Unit Serial # :
Controller Name : AXS-8066
Current IP Addr. : 192.168.001.100
Event log message
………
………
3.7.5.1 Mute the Alert Beeper
The “Mute the Alert Beeper” function item is used to control the RAID
subsystem beeper. Select No and press ENT button to turn the beeper off
temporarily. The beeper will still activate on the next event.