Installation guide

Chapter 3. LCD Panel Configuration

3.7.4.1 Display Drive Information

Using UP/DOWN buttons to choose the “Display Drive Information” option and

press ENT. Using UP/DOWN buttons to select the drive SAS/SATA number that

user wants to display. The drive information will be displayed. The SATA drive

information screen shows the Model Name, Serial Number, Firmware Rev.,

Device Capacity, Current SATA, Supported SATA, and Device State.

3.7.4.2 Create Pass-Through Disk

Disk is not controlled by the RAID subsystem firmware and thus cannot be a

part of a RAID set. The disk is available to the operating system as an individual