Installation guide

Software Operation Manual
46
3.7.3.3.1 Volume Set Migration
Migrating occurs when a volume set is migrating from one RAID level to another,
a volume set strip size changes, or when a disk is added to a raid set. Migration
status is displayed in the volume state area of the “Display Volume Set”
Information.
3.7.3.4 Check Volume Set Consistency
Use this option to check volume set consistency. To check volume set
consistency from volume set system function, press UP/DOWN buttons to
choose the “Check Volume Set Consistency” option. Using UP/DOWN button to
select the RAID set number that user want to check and press ENT. The
confirmation screen appears, Press ENT to start the check volume set
consistency.
3.7.3.5 Stop Volume Set Consistency Check
Use this option to stop volume set consistency check. To stop volume set
consistency check from volume set system function, press UP/DOWN buttons
to choose the "Stop Volume Set Consistency Check" option and then press ENT
to stop the check volume set consistency.
3.7.3.6 Display Volume Set Information
To display volume set information from volume set function, press UP/DOWN
buttons to choose the "Display Volume Set Information" option. Using
UP/DOWN buttons to select the raid set number that user wants to show and
press ENT. The volume set information will show Volume Set Name, Raid Set
Name, Volume Capacity, Port Attribute, RAID Level, Stripe Size, Member Disks,
Cache Attribute and Tagged Queuing. All value cannot be modifying by this
option.
3.7.4 Physical Drive
Choose this option from the main menu to select a physical disk and to perform
the operations listed below. To enter a physical drive functions, press ENT to
enter the main menu. Press UP/DOWN buttons to select the "Physical Drive
Functions" option and then press ENT to enter further submenus. All physical
drive submenus will be displayed.