Installation guide

Software Operation Manual
42
3.7.2.7 Delete Hot Spare Disk
To delete hot spare, press UP/DOWN to choose the Delete Hot Spare Disk
option. Using UP/DOWN to select the hot spare number that user wants to
delete and then press ENT to select it. The confirmation screens appear and
press ENT to delete the hot spare.
3.7.2.8 Display RAID Set Information
Choose the “Display Raid Set Information” option and press ENT. Using
UP/DOWN buttons to select the RAID set number. Then the RAID set
information will be displayed.
Using UP/DOWN buttons to see the RAID set information, it will show Raid Set
Name, Total Capacity, Free Capacity, Number of Member Disks, Min. Member
Disk Capacity, Raid Set State and Raid Power Status.
3.7.3 Volume Set Function
A volume set is seen by the host system as a single logical device. It is
organized in a RAID level with one or more physical disks. RAID level refers to
the level of data performance and protection of a volume set. A volume set
capacity can consume all or a portion of the disk capacity available in a RAID set.
Multiple volume sets can exist on a group of disks in a RAID set. Additional
volume sets created in a specified RAID set will reside on all the physical disks
in the RAID set. Thus each volume set on the RAID set will have its data spread
evenly across all the disks in the RAID set.
To enter the “Volume Set Functions”, press ENT to enter the main menu. Press
UP/DOWN buttons to select the “Volume Set Functions” option and then press
ENT to enter further submenus. All volume set submenus will be displayed.