Installation guide

Chapter 3. LCD Panel Configuration
37
RAID 3+ Spare requires at least 4 physical drives per RAID set.
RAID 5+ Spare requires at least 4 physical drives per RAID set.
RAID 6+ Spare requires at least 5 physical drives per RAID set.
RAID 30 requires at least 6 physical drives,
RAID 50 requires at least 6 physical drives,
RAID 60 requires at least 8 physical drives,
RAID 30+ Spare requires at least 7 physical drives, and
RAID 50+ Spare requires at least 7 physical drives.
RAID 60+ Spare require at least 9 physical drives.
After adding physical drives to the current RAID set as desired, press ESC
to
confirm the Select Drive Channel function.
Press ENT when you are finished creating the current RAID
set. To continue
defining another RAID
set, repeat step 3. To begin volume set configuration, go
to step 7.
Choose “Volume Set Functions” from the main menu. Select the “Create
Raid
Volume Set” and press ENT.
Choose one RAID set from the Select Raid Set screen. Press ENT to confirm it.
The volume set attributes screen appears:
The volume set attributes
screen shows the volume set default configuration
value that is currently being configured. The volume set attributes are:
Volume Name.
Raid Level,
Capacity (Not supported via LCD Panel.)
Stripe Size,
Cache Mode,
SAS Port/SAS LUN Base/SAS LUN, Fibre Port/ Fibre Lun Base/Fibre LUN
Tagged Queuing,
All value can be changing by the user. Press the UP/ DOWN to select
the
attributes. Press the ENT to
modify each attribute of the default value. Using
the UP/DOWN to select attribute value and press the ENT to
accept the default
value
Step9
Step5
Step6
Step8
Step7