Installation guide

Chapter 2. Configuration Methods
23
The RAID Subsystem’s 6-pin RJ11 connector’s pin assignments are defined as
below:
RJ11 Pin Assignments
Pin Description Pin Description
1
RTS 4 GND
2 RXD 5 GND
3 TXD 6 GND
2.4.1 Keyboard Navigation
The following definition is the VT-100 RAID configuration utility keyboard
navigation.
Key Function
Arrow Key
Move cursor
Enter Key
Submit selection function
ESC Key
Return to previous screen
L Key
Line draw
X Key
Redraw
2.4.2 Start-up VT100 Screen
By connecting a VT100 compatible terminal, or a PC operating in an equivalent
terminal emulation mode, all RAID subsystem monitoring, configuration and
administration functions can be exercised from the VT100 terminal.
There are a wide variety of Terminal Emulation packages, but for the most part
they should be very similar. The following setup procedure is an example Setup
of VT100 Terminal in Windows system using Hyper Terminal Version 3.0 or
higher.