Installation guide

Appendix A. Upgrading Firmware
185
3. Click the “Confirm The Operation” and press the “Submit” button.
4. The Web Browser begins to download the firmware binary to the controller
and start to update the flash ROM.
5. After the firmware upgrade is complete, a bar indicator will show “Firmware
Has Been Updated Successfully”
6. After the new firmware completes download, user should find a chance to
restart the controller for the new firmware to take effect.
Note
1. The user doesn’t need to reconfigure all of the settings after
the firmware upgrade is complete, because all of the settings will
keep us the values before upgrade.
2. Please update all binary code (BOOT, FIRM and MBR0)
before you reboot the RAID subsystem. Otherwise, a mixed
firmware package may hang the RAID subsystem.