Installation guide

Chapter 1. Introduction
13
1.2.3 RAID 10(1E)
RAID 10(1E) is a combination of RAID 0 and RAID 1, combing stripping with disk
mirroring. RAID Level 10(1E) combines the fast performance of Level 0 with the data
redundancy of Level 1. In this configuration, data is distributed across several disk drives,
similar to Level 0, which are a stripe across a number of mirrored sets for data protection.
RAID 10(1E) provides the highest read/write performance of any of the Hybrid RAID
levels, but at the cost of doubling the required data storage capacity.